| Usage |
|
The
coolflex „V“ partition wall is a flexible
insulation curtain which is mounted into the
trailer with Velcro straps unto cargo bars (with
rubber ends). One bar is mounted vertically at
the left side of the trailer, one at the right
side and one in the middle. The insulated
curtain is held-up by three PVC caps which are
mounted at the top of the curtain. Between these
caps the curtain is foreseen with synthetic
plates to keep the curtain against the roof of
the trailer. To keep the curtain positioned
against the trailer wall, the curtain is
foreseen with Velcro straps which are pulled
over the cargo bars. The curtain is made 10cm
bigger on each side. This 10cm strip is to be
folded towards the cooler unit. As soon as the
unit is turned-on, the airflow will push the
curtain against the wall of the trailer.
|
|
.
|
| Flexible
and foldable |
|
The
coolflex "V" insulated
partition wall for conditioned
trailers is produced out of flexible
materials which makes the partition
wall foldable. The wall can easily be folded to a small package for
storage.
|
|
.
|
| High
insulation quality |
|
The
coolflex "V" insulated
partition wall for conditioned
trailers is produced out of a high
insulated material (see Temax)
to provide a perfect insulator to
partition different temperatures in
trailers so frozen and chilled or unconditioned
food products can be
transported in one trailer.
|
|
.
|
|
Unique
closure with trailer wall
|
|
The
coolflex "V" insulated
partition wall for conditioned
trailers is produced bigger then the
inner size of the trailer. Each side
is ca 10cm bigger so a kind of flap is formed on the sides. These
flaps are folded to the front of the
trailer. As soon as the cooler
engine is started, the wind will
blow against these flaps and press
them against the walls of the
trailer so a perfect closure is
formed.
|
|
.
|
|
Long
duration of life
|
|
The
thermo partition walls for trailers are made out of strong
yet light weight materials so they
can provide a long duration of life.
Supermarkets and transport companies
who are using the thermo partition
walls experience
a lifetime between 3 and 5
years.
|
|
.
|
|
Easy
and fast to build-up
|
|
The
coolflex "V" insulated
partition wall for conditioned
trailers is produced with special Velcro
strips and little hats at
the top for holding cargo bars. The
whole wall is build-up in the
trailer with 3 cargo bars which are
placed vertically in the trailer.
|
|
.
|
|
Coolflex
"V" as folding door
|
|
The
coolflex V can be used as an open door system.
By opening just one cargo bar, half of the
partition wall can be opened so the complete
wall does not need to be dismounted to reach the
front chamber of the trailer.
|
